Continuous fiber laser welding VS Yag pulse laser welding
1. The fiber continuous laser welding machine uses 500W-2000W laser, the laser has a long service lifeand the service life can reach 100,000 hours.
2. The electro-optic conversion efficiency is high, and the energy of the power shaving is 25%-30% converted into laser, and the fiber conversion rate is more than 10 times that of the YAG laser.
3. The whole machine has no consumables. YAG pulse welding machine should replace the xenon lamp and lens regularly.
4. The whole machine has low energy consumption, saves electricity, high stability, maintenance-free, and low cost of use.
5. The laser welding energy density is high, welding speed is four times that of YAG pulse.the weld seam is thin,the thermal deformation is small, and the heat affected zone is narrow and deep.
6. Optical fiber output, easy to match with automated workbench or robot to improve production efficiency,and can meet 24 hours of continuous work.
7. Customizable large workbench and XYZ axis travel.
Technical Parameter List
| Product Name | Galvo Scanner Laser Welding Machine |
| Laser Power | 60W 100W 120W optional |
| Laser Wavelength | 1070nm |
| Pulse Width | 0.5-20ms |
| Pulse Frequency | ≤100Hz |
| Spot Diameter | 0.1-3mm |
| Repeat Accuracy | ±0.01mm |
| Machine Voltage | AC220V/380V 50-60Hz 3-Phase |
| Cooling System | Water Cooling |
| Cabinet Size | 1000*900*1700mm
|
Being widely used on aviation, machinery, mobile manufacture, communications, chemical industry, electrical equipment, hardware and automobile manufacture
Automobile Spare Parts: hydraulic jacking lever, filter, sensor, electromagnetic valve
Lithium Battery: columnar nut cap
Mobile phone: tab, backboard
Electronic Industry: sensor, motor rotor, capacitance, relay
Sample Pictures
